PRINTED PROTOTYPES // COMBO TOOLS

Hybrid Bottle + Can Openers

A pretzel and a fantasy key that made it onto the bench, missed the contest, and still have a bottle test to finish.

Brown PretzelPop combo opener with white salt accents, a broad bottle-pry tongue and can-tab end on a kitchen bench — PretzelPop, actually printed. The white salt accents are part of the theme; this photo proves a physical prototype, not bottle-opening performance.

Two very different outfits for the same idea.

PretzelPop brings the Oktoberfest flavour: a broad grip, pretzel cut-outs and little white salt accents. Tavern Quest Key is the fantasy-prop version, with a long handle and raised runes. It uses more filament for the look; the compact keyring design in the wider collection covers the small-tool idea.

Both combine a can-tab opening end with a broad bottle-pry tongue. The can mechanism on both has been tested by my son, who really enjoys using them. Bottle-cap engagement and repeated-use durability have not been tested.

Single-colour brown Tavern Quest Key prototype with a long handle, circular bottle mouth and raised runes — Tavern Quest Key: a deliberately oversized fantasy key. The long handle buys visual drama and potential leverage, at the cost of more filament.

Close-up of overlapping raised diamond and rune decoration on the printed Tavern Key — The early Tavern crest looked tidier on screen than in plastic. This is the printed revision shown here, before the later decoration cleanup.

Good prints. Unfinished bottle test.

I don't normally drink crown-cap bottled drinks. I could have bought a $5 beer to start testing, but didn't get myself organised. While I kept chasing the details and worrying about how the PLA edge would survive repeated use against a metal cap, the contest window closed.

The decoration needed attention too. The early Tavern crest overlapped in print; later CAD revisions cleaned it up. These photos show the actual earlier print, not proof that the revised decoration has been printed.

The can side works in our hands. The bottle side still needs to earn that sentence.

The little can opener that gets used.

My Soda Can Opener — 10 Minute Prints #002 isn't much to look at, but it's one of my more popular Creality Cloud designs. Small, practical and quick to print turns out to be a pretty good combination.

The listing includes a real single-handed GIF/video demonstration. The extra handle may help smaller hands or someone who finds a ring pull awkward because of limited grip or mobility. That is the intent, not a guarantee for every user or can. Print time depends on your printer and settings.

Get the can opener and watch the demo

Release status

Combo collection: printed prototypes; both pictured can functions tested. Bottle-cap opening and PLA wear remain untested. No finished combo-opener download is offered here.

Simple soda-can opener: published on Creality Cloud, with files, print profiles and a real-use demonstration.

The next step is a suitable crown-cap bottle and repeated-use testing. Missing the contest doesn't make the project worthless. It just makes this a workshop story instead of an entry.

Read the full maker story Back to Designs