PET ART // THREE COLOURS // PHYSICALLY PRINTED
Bedtime Buddies
A dog and cat completely settled in together under the blankets, translated into a three-colour HueForge while keeping the soft texture and quiet character of the original scene.
About the piece
Sometimes the best source photos are just ordinary moments worth keeping. This one became a monochrome-style HueForge using only black, prototype gray and white PLA.
The darker areas carry the dog and cat detail, while the quilt texture and lighter background keep the scene readable rather than turning it into one large dark mass.
Physically printed and released
- Artwork size
- 150.03 × 199.98 mm
- Thickness
- 2.08 mm
- Layer height
- 0.08 mm
- Base layer
- 0.16 mm
- Palette
- Black, Prototype Gray and White PLA
- Infill
- 100%
- Supports
- None
- Validated on
- Creality K2 Pro · 0.4 mm nozzle
THE RECIPE
Three filaments, two swaps
HueForge is doing the heavy lifting through filament transmission rather than a pile of colours. The tested release starts in black, changes to Prototype Gray at layer 10 / 0.88 mm, then changes to white at layer 19 / 1.60 mm for the remainder.
Different filament brands and Transmission Distance values can move the final tones around, so the Creality project should be treated as the tested baseline rather than assuming every black, gray and white combination will land identically.
Get the model
The physically tested project is published on Creality Cloud, including the release 3MF and print settings.
Bedtime Buddies on Creality Cloud ↗