FILM-INSPIRED // PHYSICALLY PRINTED

Rocky — HueForge Movie Poster

My Rocky movie-poster HueForge: a film-inspired piece brought into the real world with layered filament.

Physical Rocky HueForge with raised arms and red Rocky lettering — Physical print photo: the finished Rocky tribute.

About the piece

I have physically printed this piece. The Creality listing carries the model files and its print information.

Physically printed

If you print this, please download it from the original listing. It supports my creator page and keeps the files and feedback together.

An independent fan-art / tribute piece. Referenced film, vehicle and brand names belong to their respective owners. Follow the terms on the original listing.

Artwork & print gallery

Rocky poster source image with raised arms and red lettering — Source image used for the Rocky HueForge; film imagery, not a print photograph.

Rocky slicer preview showing 0.08 mm layers and a 0.16 mm first layer — Creality Print slicer preview and layer settings. Estimated time varies with the profile.

Rocky sliced model preview with four filament colours — A second sliced preview and filament selection, not a photograph of the print.

Print recipe

The supplied HueForge recipe uses a 133.25 × 200 mm model, 100% infill, 0.08 mm layers and a 0.16 mm first layer. Actual mesh thickness is approximately 1.66 mm.

Colour changes from the HueForge recipe
Start / layer	Height	Colour
Start	Base	Black
6	0.56 mm	Prototype Gray
12	1.04 mm	White
14	1.20 mm	Black
18	1.52 mm	Red

Check the sliced preview with your own filaments. The recipe's later grey slider at 1.84 mm is above the mesh and does not affect this print.