DISPLAY & GIFTING

HueForge Stand V6.1 — Upright Slim

An upright, slim display stand with an unbranded finish.

Two physical original HueForge stands in different sizes — Physical original stand prints in two sizes.

About the design

The original stand uses an open cradle and a front retaining lip. V6.1 brings the artwork more upright: 66.4° from horizontal, while retaining the rear bridge and flat base.

I have test-printed the design at 100%, 90% and 75% scale and found those prints functional. The release includes slim, reinforced and unbranded options.

Recommended starting settings: supplied orientation, supports off, 0.20–0.24 mm layers, four walls, at least five bottom layers and 15–25% infill.

For a smaller, lighter everyday option, see the 60 mm Lite stand.

A separate display option for the artwork. The Creality listing has the fit and print details.

View on Creality Cloud ↗

If you print this, please download it from the original listing. It supports my creator page and keeps the files and feedback together.

A closer look

Front and rear views of original HueForge stand prints — Physical original stands showing the supporting back and open cradle.

Two original HueForge stand prints on the printer bed — Physical stand prints on the build plate.

Original HueForge stands being printed — The original stands during printing.